خدمات ما
صنایع تحت پوشش
صنایع غذایی
روغن های خوراکی
غلات
گوشت و فرارورده های خام دامی
خوراک دام
لوازم الکتریکی و الکترونیکی
مواد شیمیایی
پتروشیمی
صنایع نفت گاز
دارو و مواد بیولوژیک و واکشن های دامی
نساجی
کاغذ و سلولز
مصالح ساختمانی
بازرسی قطعات خودرو
پسماند و تبدیل ماده و انرژی
صنایع هوایی
پدافند غیرعامل
🔍 واحد بازرسی کالا
طرح های ارزیابی انطباق پایش سلامت آسیا
طرح محصولات معدنی غیر فلزی و مصالح ساختمانی پایش سلامت آسیا
طرح نساجی و چرم پایش سلامت آسیا
طرح روغن و چربی های خوراکی پایش سلامت آسیا
سیستم صنعت غذا و محصولات کشاورزی پایش سلامت آسیا
سیستم ارزیابی انطباق صنعت غذا
سیستم ارزیابی انطباق محصولات کشاورزی و دامپروری
طرح مواد شیمیایی پایش سلامت آسیا
طرح وسایط نیرو محرکه اجزا و قطعات پایش سلامت آسیا
طرح لوازم الکتریکی و الکترونیکی پایش سلامت آسیا
طرح ارزیابی انطباق تجهیزات سرگرمی و اسباب بازی
طرح ارزیابی انطباق سایر مصنوعات
طرح ارزیابی انطباق لوازم و تجهیزات مکانیکی
طرح ارزیابی انطباق ابزار دقیق
طرح ارزیابی انطباق سیستم صنایع نفت و پتروشیمی پایش سلامت آسیا
طرح کانی های معدنی پایش سلامت آسیا
طرح ارزیابی انطباق غلات پایش سلامت آسیا
طرح تجهیزات ورزشی پایش سلامت آسیا
ارزیابی انطباق مراکز خدماتی
ارزیابی انطباق هایپرمارکتها و سوپرمارکتها
ارزیابی انطباق رستورانها و خدمات غذایی
ارزیابی انطباق هتلها و مراکز اقامتی
ارزیابی انطباق در حوزه خدمات بیمه
ارزیابی انطباق در حوزه خدمات مالی و بانکی
ارزیابی انطباق باشگاههای ورزشی و مراکز تناسب اندام
ارزیابی انطباق خدمات پس از فروش و تعمیرگاههای خودرو
سیستم مدیریت کیفیت
سامانه اموزشی وعلمی
سیستم مدیریت پروژه و ارتباط با مشتری
درباره شرکت پایش سلامت آسیا
صفحه ورود – العربية
صفحه ورود – English
General PPE Requirements
Has a hazard assessment to identify and control physical and health hazards been completed
Yes
No
N/A
Have engineering and/or administrative controls been applied prior to the use of PPE
Yes
No
N/A
Has appropriate PPE that matches the hazard been identified and provided to employees for use
Yes
No
N/A
Has the effectiveness of the PPE program been reviewed, updated and evaluated periodically
Yes
No
N/A
Have employees been trained on the use and care of the PPE
Yes
No
N/A
Have employees been trained on the limitations of the PPE
Yes
No
N/A
?Is the PPE training documented and kept on file
Yes
No
N/A
?Are supervisors enforcing the use of required PPE
Yes
No
N/A
?Is PPE inspected regularly and properly maintained
Yes
No
N/A
Is worn and damaged PPE removed from service and replaced
Yes
No
N/A
When the following type of PPE is necessary, is the employer providing and paying for the PPE as stated by the OSHA standard 1910.132
Yes
No
N/A
If the employee provides his/her own PPE, is it adequate to protect the worker from hazards in the workplace
Yes
No
N/A
Eye And Face Protection
Do employees perform hammering, cutting, grinding, sanding and/or masonry work that produces or could produce particles/dust or debris
Yes
No
N/A
Do employees handle chemicals that could splash into their eyes or face
Yes
No
N/A
?Do employees work with wet or powdered cement
Yes
No
N/A
?Do employees weld
Yes
No
N/A
?Do employees work in dusty or windy conditions
Yes
No
N/A
If “yes” in response to any of the above eye and face protection questions, are the employees using appropriate PPE as applicable (i.e., safety glasses, goggles, welding shields, face shields, etc.)
Yes
No
N/A
Do safety glasses have frames constructed of plastic or metal with impact-resistant lenses
Yes
No
N/A
?Do safety glasses have side shields
Yes
No
N/A
Do safety glasses and goggles completely cover the eyes, eye socket and area surrounding the eyes
Yes
No
N/A
?Are goggles tight-fitting
Yes
No
N/A
Are welding shields made of fiberglass or vulcanized fibre with a filtered lens
Yes
No
N/A
Do the filter lenses have the appropriate shade number to protect against specific hazards of the welding work being performed
Yes
No
N/A
Is damaged, defective or worn eye/face protection properly discarded and replaced
Yes
No
N/A
Dust Masks
?Does the mask free of any holes in the filter
Yes
No
N/A
?Is the metal nose clip undamaged
Yes
No
N/A
?Do the face straps still have proper elasticity
Yes
No
N/A
Respirators
Is there a written respiratory protection program in place that is compliant with 29 CFR 1910.134
Yes
No
N/A
Have medical evaluations been conducted for employees required to wear a respirator
Yes
No
N/A
?Have employees been fit-tested
Yes
No
N/A
Has air quality monitoring been conducted by a qualified industrial hygienist
Yes
No
N/A
Have employees been trained on the written program and how to use and care for the respirators
Yes
No
N/A
Have all training and fit test results been documented and kept on file
Yes
No
N/A
?Is the face piece clean
Yes
No
N/A
Does the exhalation valve allow air to exit mask and not enter
Yes
No
N/A
?Is the regulator functioning properly
Yes
No
N/A
?Are the buckles, back plate and straps in good condition
Yes
No
N/A
?Is the pressure hose in working order
Yes
No
N/A
Are the pressure cylinder, knobs and gauges in good condition and working properly
Yes
No
N/A
?Are there any air leaks
Yes
No
N/A
Is there any visible damage to any part of the mask/respirator, hoses or cylinder
Yes
No
N/A
Is the filter or cartridge up-to-date, clean and free of any deterioration/damage
Yes
No
N/A
?Is the air cylinder fully charged
Yes
No
N/A
Head Protection
Have employees been trained on how to select, use, adjust, wear and care for their head protection
Yes
No
N/A
?Is the head protection clean and in good condition
Yes
No
N/A
Is the head protection adjusted properly to fit the wearer’s head
Yes
No
N/A
?Are worn straps replaced as needed
Yes
No
N/A
Are hard hats inspected daily for cracks or any other visible damage
Yes
No
N/A
Are hats discarded and replaced if they received a heavy blow, even if damage is not visible
Yes
No
N/A
Are hats kept out of direct sunlight or heat and cleaned only with hot, soapy water
Yes
No
N/A
?Are Class A hats worn in manufacturing situations
Yes
No
N/A
?Are Class B hats worn in situations with electrical hazards
Yes
No
N/A
Foot Protection
Has the proper foot protection been selected and are employees required to use it when exposed to falling objects, punctures, crushing or rolling objects, stubbing, chemical or corrosive contact, electrical shock or burns, slips or falls
Yes
No
N/A
?Is protective footwear sturdy with non-skid soles
Yes
No
N/A
Is steel-toed or non-metallic safety-toed footwear required to resist impact
Yes
No
N/A
In areas where there is risk for a puncture type injury, do shoes have flexible metal soles or inner shoes
Yes
No
N/A
Do employees wear the proper protective footwear when working in areas that have electrical hazards
Yes
No
N/A
Are employees wearing footwear with slip resistant soles when working in wet or slippery areas
Yes
No
N/A
Are employees who work in areas that have a risk of chemical or corrosive exposures wearing the appropriate chemical-resistant boots
Yes
No
N/A
Is damaged, defective or worn foot protection properly discarded and replaced
Yes
No
N/A
Hand Protection
Has the proper hand protection been selected and are employees required to use it when exposed to harmful substances (skin contact), sever cuts/lacerations, severe abrasions, punctures, thermal and chemical burns, temperature extremes, corrosive liquids, blood and other potentially infectious materials
Yes
No
N/A
Have employees been trained on the differences in types of gloves and when and how to use them
Yes
No
N/A
When working with chemicals or corrosives, are employees using the proper type of glove as stated on the Safety Data Sheet (SDS)
Yes
No
N/A
Are the gloves maintained per manufacturer’s recommendations
Yes
No
N/A
Are employees who have allergies to certain gloves given alternative gloves
Yes
No
N/A
Do gloves fit properly and are they rated for the specific task being performed
Yes
No
N/A
Is damaged, defective or worn hand protection properly discarded and replaced
Yes
No
N/A
Hearing Protection
Are there work areas in which employees are exposed to excessively loud noise
Yes
No
N/A
Has noise monitoring been conducted by an industrial hygienist or other qualified person
Yes
No
N/A
If one or more employees are exposed to sound levels greater than 85 dBA over an eight-hour period, has a written hearing conservation program compliant with 29 CFR 1910.95 been implemented
Yes
No
N/A
Have engineering and/or administrative controls been put in place prior to the use of PPE
Yes
No
N/A
?Are noise hazard areas identified with signs
Yes
No
N/A
Are employees required to wear hearing protection in areas where sound levels exceed 85 dBA
Yes
No
N/A
Have employees been trained on the hearing conservation program and how to select, use, wear and care for the hearing protection
Yes
No
N/A
?Does the hearing protection properly fit the employee
Yes
No
N/A
Is damaged, defective or worn hearing protection properly discarded and replaced
Yes
No
N/A
Protective Coats & Pants
Have employees been trained on how to select, use, wear and care for the protective clothing
Yes
No
N/A
Does the clothing fit properly and overlap at least two inches
Yes
No
N/A
Is the clothing clean and free of any hazardous substances, chemicals, blood or bodily fluids
Yes
No
N/A
?Does the clothing have any tears, cuts, holes or burns
Yes
No
N/A
Is damaged, defective or worn protective clothing properly disposed of and replaced
Yes
No
N/A
keyboard_arrow_up
فهرست
